The Materials' Group

The following links are connected to gif images of ANSYS output of a 2D 45degree joint of Cu/SS.

The first link of each group will show the three crack lengths (0.65, 1.0 and 1.3mm) in contrast. Each graphic is then linked to a close up image view of the respective joint area.

The crack links on this page send the viewer directly to the zoomed images of each specific crack length.

XY Shear Stress 0.65mm Crack 1.0mm Crack 1.3mm Crack

von Mises Stress 0.65mm Crack 1.0mm Crack 1.3mm Crack

X-Dimensional Stress 0.65mm Crack 1.0mm Crack 1.3mm Crack

Y-Dimensional Stress 0.65mm Crack 1.0mm Crack 1.3mm Crack

1st Principal Stress 0.65mm Crack 1.0mm Crack 1.3mm Crack

2nd Principal Stress 0.65mm Crack 1.0mm Crack 1.3mm Crack

These graphics were created by Min Jie using ANSYS 5.3

Questions about this page should be directed to: Prof. James Stubbins